Got a Fuel pump? Water pump? Methanol Injection, Nitrous Valve and Heater? 2 Step AND a ton of spaghetti for wires! If you are most people WE hate the wiring! no matter how clean you make it you still have a ton of wires! Want to get rid of those wires, relays and fuses? Well now you can!
Though the SPOD has originated form the Off Road Market this unit can be easily used in your street / strip car or race car to control any of your 12VDC accessories as mentioned above.
The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the passenger compartment) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.
Fully programmable, digital controlled system
8 circuits rated at 30 amps at 12.5 VDC per circuit
Integrated low voltage cutoff (LVCO) battery protection w/ optional override
One ATM mini-style fuse for LVCO protection & reset
Failsafe self-healing fault protection system (from 1.5 to 30amps)
Current-sensing MOSFETs controlled by a microprocessor (no fuses & relays)
50amp auto-resetting circuit breaker
Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
Operates on 12VDC or 24VDC
8-position input terminal block for controlling outputs
Built-in Bluetooth capabilities for remote control
Protection against: overheating, over-current, shorts, reverse polarity & field collapse
Ignition control and safety lock-out for switches 1 and 2 (optional)
Up to 4 BantamX units can be daisy chained & controlled by one Touchscreen
On-demand wireless software updates/upgrades
Powder coated steel base w/ built in hardware
Silicone gasket for weatherproofing
Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement
Universal & vehicle specific mounting options
Robust insulated base and cover
FEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):
Each switch can be programmed for:
On Road and Off Road mode of operation
The following features are only available through the purchase of our Pro-Series mobile App:
Initial startup current for each circuit is raised to 65amps for 5 seconds
Program any circuit to be always on while still maintaining fault protection
Option to disable deep sleep mode
Selectable auto restart after circuit shuts down from over current/short
Programmable Current Limiting (in 2amp increments up to 30amps)
Selectable auto restart for current limiting shut down
Selectable “Latch” or “Momentary” actions for inputs
Programmable ignition control for all 8 circuits
Variable strobe function to create custom flash/strobe patterns
EXTERNAL CONTROLLER OPTIONS (not included with system and can only be used in conjunction with an sPOD controller)
Third party switches
Alpine Audio systems KAC-001 head unit controller
Sensors, thermostats, pressure switches, fan controllers & more
TOUCHSCREEN CONTROL PANEL
Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.
Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.
Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.
Increase in switch lifecycle over traditional electromechanical switches.
Touchscreen Control Module Features:
Voltage feedback (vehicles battery/alternator voltage)
Amperage meter for each switch gives you the status of how much current each accessory is drawing
Board temperature feedback (shown on screen)
Customization: legends (3 lines of text)
Automatic backlighting off after 30 minutes of being inactivity
Automatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)
One touch off function
One second hold on off button shuts all circuits down
Automatic system shut down when the touchscreen is unplugged
Multiple Source select (One touchscreen can control up to 32 circuits)
Come with its own mounting bracket.
Bluetooth for use in programming the touchscreen. *
*The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range. Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
All returns are must be authorized before returning and must be made within 30 days of the original order.
All sales are final on all OEM Factory Parts which includes GM, Holden or other automotive manufactures.
All sales are final on special or custom orders that involve a wait time, color application or custom fitment (wheels, wheel spacers, gauges, car covers etc.)
All electronics that are NOT made to order have a 15 day return policy with the exclusion of a warranty.
All Sales are at the final price when at check out and paid for. There are no return refunds for parts that may go on sale afterwards. This includes Black Friday Sales.
All returns if not the fault of the product, not under the disclaimer clause, change of customer mind or wrong item ordered is subject to a 20% to 25% restocking fee (depending on manufacture) and must do so within 30 days of purchase. To receive credit or exchange towards the product it must be factory sealed, unused and unopened if applicable. Customers will be required to return that part at their own cost and provide a tracking number for that return. All returns are suggested to be insured. All damages on the returns are the responsibility of the shipper and no credit or replacement will be issued upon that return if it is damaged. Items that are defective upon arrival and if they are in need of a replacement a label will be issued on a case by case basis but all items MUST BE RETURNED first before the replacement. All customer returns that are damaged must be claimed between the customer and shipper. Maverick Man Inc. will not be responsible for that claim. All shipping costs for exchanges as a return, are the responsibility of the customer and must be paid for prior to shipping the exchange or replacement. If product is deemed defective the customer will receive a full refund for the item and initial shipping cost. If the item is found NOT to be defective or damaged due to shipping or production, the customer will only receive a refund for the item only minus the shipping cost.
DO NOT throw out packing until you are 100% sure it has no reason to be returned. Any and all returns must be shipped back in the original packing it was received in. Packing can include such things as the whole box, wood supports, bubble wrap and styrofoam.